This stunning new mounting option will blow you and your customers away!

ORDER THROUGH ADVANCED ROES TODAY!

Here’s how it works: a piece of 1/4 inch thick Plexiglas is cut to size and the edges are buffed until they gleam. One side of the Plexiglas is coated with an optically clear adhesive. Your print is mounted, face down, on to the adhesive. A piece of 0.040 Styrene is mounted to the back of your mounted print to protect it from dents and dings. The result is a piece that practically leaps off the wall at you. You have to see it to really understand it.

• Prints on Metallic Paper
• Includes 0.040 Styrene Backer for protection
• Finished piece is up to 3/16 inch undersized to accommodate flush trimming
• Can be drilled and suspended with wire or cable

Image Selections: LiquidMount works well with these types of images:

• Color, black & white, spot color
• High contrast, Saturated colors
• Images with some sort of metal in them

GatorFloat™: The GatorFloat™ enables your customer to hang the finished LiquidMount on the wall with a single picture nail. The GatorFloat™ is a piece of 3/4 inch black Gatorfoam™ undercut by roughly six inches in each direction. It is then bonded to the center of the back of the LiquidMounted™ print. Suitable hanging hardware is then secured to the GatorFloat™.
The result is a gorgeous three-dimensional print that appears to float on the wall.

Final Print Display: In addition to our GatorFloat™ option, there are several ways to display LiquidMount™ prints:

• Tabletop easel
• Aluminum corner clips
• Picture Rail